Français
Español
Deutsch
EnglishSTADÉLUM Engineering Department
An initial approach to define your sports lighting project
Describe your installation, objectives and known site constraints. STADÉLUM will then contact you to clarify your requirements and organise the exchange of the plans and documents required for the analysis.
You present your project
The request form collects the first useful information as well as your contact details.
STADÉLUM contacts you
We review your requirements and tell you which plans and data are needed to continue the analysis.
You send the documents
File exchange is then organised using a method suited to their type and size.
The preliminary study is prepared
It provides an initial technical approach based on the information and assumptions supplied.
Documents to prepare
Information that may be requested after the initial contact
No file is required to submit the initial request. After reviewing your project, STADÉLUM will tell you which plans, dimensions and documents need to be provided.
General layout plan
Preferably a DWG or DXF file. If unavailable, a PDF may be used provided the scale is clearly visible and the main dimensions can be read.
Building plans
For an indoor or covered facility: section drawings, structural plans, available heights, beams, trusses and fixing constraints.
Mounting heights
Planned luminaire height, pole or support height, and existing height in the case of renovation.
Project objectives
Main sport, secondary uses, target illuminance level, desired uniformity and any specific requirements in the project specifications.
Applicant responsibilities
Input data must be checked before the study
The preliminary study is calculated using the information supplied. The applicant remains responsible for the reliability, accuracy and consistency of the data provided.
Installation heights
Check the planned or existing mounting heights and report any uncertainty before the simulation is started.
Luminaire positioning
Confirm the available locations, usable supports and any positions imposed by the building or existing installation.
Expected result
Specify the sport, intended use, desired illuminance level, target uniformity and any particular requirement to be incorporated into the study.
Review upon receipt
Upon receipt of the preliminary study, check that the plans, heights, positions, assumptions and objectives shown in the document correctly match the request.
Any error or change concerning a height, position, support, dimension or objective must be reported before the configuration is approved.
Renovation project
Keeping the existing positions must be clearly specified
When replacing luminaires, the study may need to retain existing positions in order to limit changes to cabling or supports.
In this case, the applicant must provide precise details of the current locations, heights, number of luminaires, technology, power where known and the actual possibilities for adjustment or re-aiming.
Scope of the service
A free, indicative preliminary study carried out remotely
The preliminary study is intended to provide an initial approach to the project: proposed layout, selection of luminaires and optics, estimated installed power and simulated photometric results based on the data supplied.
What it may include
- an initial luminaire layout;
- a proposed power rating and optics;
- simulated photometric values;
- an initial assessment of uniformity;
- observations concerning identified constraints.
What it does not include
- a site visit or site survey;
- on-site verification of dimensions;
- structural or detailed electrical design;
- construction supervision and installation inspection;
- luminaire adjustment during commissioning;
- illuminance measurements after installation.
The values presented are simulation results and not on-site measurements. Their consistency depends on the products, heights, positions, aiming directions and actual conditions matching the assumptions used in the preliminary study.
Preliminary study request
Present your project to our engineering department
Have you identified your installation, its main constraints and the objectives you want to achieve? Use our preliminary study request form to send us the initial information required to analyse your project.
No plan is required to submit this initial request. STADÉLUM can then tell you which documents should be provided depending on your installation.
Before starting the study
Reliable data allows for a more relevant initial assessment
Plans, heights, positions, uses and objectives must be confirmed. STADÉLUM can then build a configuration consistent with the information available.